View EK42426-01_8936807.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pe42426 document category: product specification ultracmos? spdt rf switch, 5C6000 mhz ?2016, peregrine semiconductor corporation. all rights reserved. ? headquarters: 9380 carroll park drive, san diego, ca, 92121 product specification doc-78386-1 C (09/2016) www.psemi.com features ? best in class linearity across frequency band ? exceptional harmonics ? 2fo of ?121 dbc @ 900 mhz ? 3fo of ?135 dbc @ 900 mhz ? low insertion loss and high isolation performance ? insertion loss of 0.3 db @ 2000 mhz ? high esd performance of 3 kv hbm ? packaging ? 12-lead 3 3 0.75 mm qfn applications ? land mobile radio (lmr) ? general switching applications product description the pe42426 is a harp? technology-enhanced reflective spdt rf switch designed for use in land mobile radio (lmr) and general switching applications. it deliv ers high linearity and excellent harmonics performance across the entire operational band. it also features lo w insertion loss and high isolation performance making the pe42426 ideal for general switching applications. the pe42426 is manufactured on peregrine?s ultracmos ? process, a patented variation of silicon-on-insulator (soi) technology on a sapphire substrate, offering the perf ormance of gaas with the economy and integration of conventional cmos. figure 1 ? pe42426 functional diagram rfc cmos control driver rf2 rf1 v1
pe42426 spdt rf switch page 2 doc-78386-1 C (09/2016) www.psemi.com absolute maximum ratings exceeding absolute maximum ratings listed in table 1 may cause permanent damage. operation should be restricted to the limits in table 2 . operation between operating range maximum and absolute maximum for extended periods may reduce reliability. esd precautions when handling this ultracmos device, observe the same precautions as with any other esd-sensitive devices. although this device contains circuitry to protect it fr om damage due to esd, precautions should be taken to avoid exceeding the rating specified in table 1 . latch-up immunity unlike conventional cmos devices, ultracmos devices are immune to latch-up. table 1 ? absolute maximum ratings for pe42426 parameter/condition min max unit supply voltage, v dd ?0.3 5.5 v digital input voltage, v1 ?0.3 3.6 v rf input power 39 dbm maximum junction temperature +150 c storage temperature range ?65 +150 c esd voltage hbm (1) , all pins 3000 v esd voltage cdm (2) , all pins 500 v notes: 1) human body model (mil-std 883 method 3015). 2) charged device model (jedec jesd22-c101).
pe42426 spdt rf switch doc-78386-1 C (09/2016) page 3 www.psemi.com recommended operating conditions table 2 lists the recommended operating conditions for the pe42426. devices should not be operated outside the operating conditions listed below. table 2 ? recommended operating conditions for pe42426 parameter min typ max unit supply voltage, v dd 2.3 3.3 5.5 v supply current, i dd 130 200 a digital input high, v1 1.17 3.6 (1) v digital input low, v1 ?0.3 0.6 v rf input power, cw (2) 33 dbm rf input power, pulse (3) 38 dbm operating temperature range ?40 +25 +105 c notes: 1) maximum digital input voltage is limited to v dd and cannot exceed 3.6v. 2) 100% duty cycle. 3) pulsed, 5% duty cycle of 4620 s period, 50 ? .
pe42426 spdt rf switch page 4 doc-78386-1 C (09/2016) www.psemi.com electrical specifications table 3 provides the pe42426 key electrical specifications @ +25 c, v dd = 3.3v, z s = z l = 50 ? , unless otherwise specified. table 3 ? pe42426 electrical specifications parameter path condition min typ max unit operating frequency 5 6000 mhz insertion loss (1) rfc?rfx 5?2000 mhz 2000?3000 mhz 3000?4000 mhz 4000?5000 mhz 5000?6000 mhz 0.30 0.35 0.40 0.40 0.75 0.55 0.65 0.75 0.75 1.30 db db db db db isolation all paths 5?2000 mhz 2000?3000 mhz 3000?4000 mhz 4000?5000 mhz 5000?6000 mhz 31 27 23.5 20 17 33 29 25 22 20 db db db db db return loss (1) rfc, rfx 5?2000 mhz 2000?3000 mhz 3000?4000 mhz 4000?5000 mhz 5000?6000 mhz 33 22 20 25 12 db db db db db 2nd harmonic, 2fo rfx p in = 18 dbm @ 900 mhz, fo ?121 dbc 3rd harmonic, 3fo rfx p in = 18 dbm @ 900 mhz, fo ?135 dbc input ip2 p in = 18 dbm @ 900 mhz 130 dbm input ip3 p in = 18 dbm @ 900 mhz 83 dbm input 0.1db compression point (2) 5?6000 mhz 40 dbm switching time 50% ctrl to 90% or 10% rf 35 s notes: 1) high frequency performance can be improved by external matching. 2) the input 0.1db compression point is a linearity figure of merit. refer to table 2 for the operating rf input power (50 ? ).
pe42426 spdt rf switch doc-78386-1 C (09/2016) page 5 www.psemi.com switching frequency the pe42426 has a maximum 10 khz switching frequency. switching frequency describes the time duration between switching events. switching time is the time duration between the point the control signal reached 50% of the final value and the point the output signal reaches within 10% or 90% of its target value. spurious performance the pe42426 spur fundamental occurs around 10 mhz. its typical performance is ?154 dbm/hz (v1 = h) and ?165 dbm/hz (v1 = l), with 100 khz bandwidth. thermal data psi-jt ( ? jt ), junction top-of-package, is a thermal metric to estimate junction temperature of a device on the customer application pcb (jedec jesd51-2). ? jt = (t j ? t t )/p where ? jt = junction-to-top of package characterization parameter, c/w t j = die junction temperature, c t t = package temperature (top surface, in the center), c p = power dissipated by device, watts control logic table 5 provides the control logic truth table for the pe42426. table 4 ? thermal data for pe42426 parameter typ unit ? jt 21 c/w table 5 ? truth table for pe42426 state v1 rfc?rf1 h rfc?rf2 l
pe42426 spdt rf switch page 6 doc-78386-1 C (09/2016) www.psemi.com typical performance data figure 2 ? figure 11 show the typical performance data @ +25 c, v dd = 3.3v, z s = z l = 50 ? , unless otherwise specified. figure 2 ? insertion loss vs temperature (rfcCrfx) ?4 ?3.5 ?3 ?2.5 ?2 ?1.5 ?1 ?0.5 0 012345678 inseron loss (db) frequency (ghz) ?40 c +25 c +85 c +105 c
pe42426 spdt rf switch doc-78386-1 C (09/2016) page 7 www.psemi.com figure 3 ? insertion loss vs v dd (rfcCrfx) ?4 ?3.5 ?3 ?2.5 ?2 ?1.5 ?1 ?0.5 0 012345678 insertion loss (db) frequency (ghz) 2.3v 3.3v 5.5v figure 4 ? rfc port return loss vs temperature ?50 ?45 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 012345678 return loss (db) frequency (ghz) ?40 c +25 c +85 c +105 c
pe42426 spdt rf switch page 8 doc-78386-1 C (09/2016) www.psemi.com figure 5 ? rfc port return loss vs v dd ?50 ?45 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 012345678 return loss (db) frequency (ghz) 2.3v 3.3v 5.5v figure 6 ? active port return loss vs temperature ?50 ?45 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 012345678 return loss (db) frequency (ghz) ?40 c +25 c +85 c +105 c
pe42426 spdt rf switch doc-78386-1 C (09/2016) page 9 www.psemi.com figure 7 ? active port return loss vs v dd ?50 ?45 ?40 ?35 ?30 ?25 ?20 ?15 ?10 ?5 0 012345678 return loss (db) frequency (ghz) 2.3v 3.3v 5.5v figure 8 ? isolation vs temperature (rfxCrfx) ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 012345678 isolation (db) frequency (ghz) ?40 c +25 c +85 c +105 c
pe42426 spdt rf switch page 10 doc-78386-1 C (09/2016) www.psemi.com figure 9 ? isolation vs v dd (rfxCrfx) -90 -80 -70 -60 -50 -40 -30 -20 -10 0 012345678 isolation (db) frequency (ghz) 2.3v 3.3v 5.5v figure 10 ? isolation vs temperature (rfcCrfx) ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 012345678 isolation (db) frequency (ghz) ?40 c +25 c +85 c +105 c
pe42426 spdt rf switch doc-78386-1 C (09/2016) page 11 www.psemi.com figure 11 ? isolation vs v dd (rfcCrfx) ?90 ?80 ?70 ?60 ?50 ?40 ?30 ?20 ?10 0 012345678 isolation (db) frequency (ghz) 2.3v 3.3v 5.5v figure 12 ? iip2 vs frequency 70 80 90 100 110 120 130 140 0123456 iip3 (dbm) frequency (ghz) rf1 rf2
pe42426 spdt rf switch page 12 doc-78386-1 C (09/2016) www.psemi.com figure 13 ? iip3 vs frequency 50 55 60 65 70 75 80 85 90 95 100 0123456 iip3 (dbm) frequency (ghz) rf1 rf2
pe42426 spdt rf switch doc-78386-1 C (09/2016) page 13 www.psemi.com evaluation kit the pe42426 evaluation board was designed to ease customer evaluation of the pe42426 rf switch. the rf common port is connected through a 50 ? transmission line via j3. rf1 and rf2 ports are connected through 50 ? transmission lines via j1 and j2, respectively. a 50 ? through transmission line is available via j4 (thru left) and j5 (thru right), which can be used to de-embed the loss of the pcb. j6 provides dc and digital inputs to the device. figure 14 ? evaluation kit layout for pe42426
pe42426 spdt rf switch page 14 doc-78386-1 C (09/2016) www.psemi.com pin information this section provides pinout information for the pe42426. figure 15 shows the pin map of this device for the available package. table 6 provides a description for each pin. figure 15 ? pin configuration (top view) exposed ground pad gnd rf1 gnd nc v dd v1 gnd rfc gnd 1 3 2 gnd rf2 gnd 9 4 5 6 12 11 10 7 8 pin 1 dot marking table 6 ? pin descriptions for pe42426 pin no. pin name description 1, 3, 7, 9, 10, 12 gnd ground 2 rf1 (*) rf port 1 4 nc do not connect 5 v dd supply voltage (nominal 3.3v) 6 v1 digital control logic input 1 8 rf2 (*) rf port 2 11 rfc (*) rf common pad gnd exposed pad: ground for proper oper- ation note: * rf pins 2, 8 and 11 must be at 0 vdc. the rf pins do not require dc blocking capacitors for pr oper operation if the 0 vdc require- ment is met.
pe42426 spdt rf switch doc-78386-1 C (09/2016) page 15 www.psemi.com packaging information this section provides packaging data including the moisture sensitivity level, package drawing, package marking and tape-and-reel information. moisture sensitivity level the moisture sensitivity level rating for the pe42426 in the 12-lead 3 3 0.75 mm qfn package is msl1. package drawing top-marking specification figure 16 ? package mechanical drawing for 12-lead 3 3 0.75 mm qfn figure 17 ? package marking specifications for pe42426 0.10 c 0.10 c (2x) (2x) a b top view bottom view recommended land pattern pin #1 corner 9 10 6 7 12 1 4 3 3.00 3.00 1.600.05 1.600.05 0.50 0.400.05 (x12) 0.230.05 (x12) (x8) 9 10 6 7 12 1 4 3 1.65 1.65 0.25 (x12) 0.85 (x12) 0.50 (x8) 2.90 ref. 2.90 ref. 0.750.05 0.05 max 0.10 c a b 0.05 c c 0.10 c 0.05 c seating plane all features 0.20 side view = yy = ww = zzzzzz = pin 1 indicator last two digits of assembly year assembly work week assembly lot code (maximum six characters) 42426 yyww zzzzzz
pe42426 spdt rf switch page 16 doc-78386-1 C (09/2016) www.psemi.com tape and reel specification figure 18 ? tape and reel specifications for 12-lead 3 3 0.75 mm qfn t k0 a0 b0 p0 p1 d1 a section a-a a direction of feed d0 e w0 p2 see note 3 see note 1 f see note 3 a0 b0 k0 d0 d1 e f p0 p1 p2 t w0 3.30 3.30 1.10 1.50 + 0.1/ -0.0 1.5 min 1.75 0.10 5.50 0.05 4.00 8.00 2.00 0.05 0.30 0.05 12.00 0.3 device orientation in tape pin 1 notes: 1. 10 sprocket hole pitch cumulative tolerance 0.2 2. camber in compliance with eia 481 3. pocket position relative to sprocket hole measured as true position of pocket, not pocket hole
pe42426 spdt rf switch product specification www.psemi.com doc-78386-1 C (09/2016) document categories advance information the product is in a formative or design stage. the datasheet contains design target specifications for product development. specifications and features may change in any manner without notice. preliminary specification the datasheet contains preliminary data. additional data may be added at a later date. peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. product specification the datasheet contains final data. in the event peregrine decides to change the specifications, peregri ne will notify customers of the intended changes by issuing a cnf (customer notification form). product brief this document contains a shortened version of the datasheet. for the full datasheet, contact sales@psemi.com. not recommended for new designs (nrnd) this product is in production but is not recommended for new designs. end of life (eol) this product is currently going th rough the eol process. it has a specific last-time buy date. obsolete this product is discontinued. orde rs are no longer accepted for this product. sales contact for additional information, contact sales at sales@psemi.com. disclaimers the information in this document is believed to be reliable. ho wever, peregrine assumes no liability for the use of this inform ation. use shall be entirely at the user?s own risk. no patent rights or licenses to any circuits described in this document are implied or granted to any third party. peregrine?s products are not designed or intended for use in devi ces or systems intended for surgical implant, or in other appl ications intended to support or sustain life, or in any applicati on in which the failure of the peregrine product could create a situation in which personal injury or death might occur. peregrine assumes no liability for damages, incl uding consequential or incidental damages, aris ing out of the use of its products in such applications. patent statement peregrine products are protected under one or more of the following u.s. patents: patents.psemi.com copyright and trademark ?2016, peregrine semiconductor corporation. all rights reserved. the peregrine name, l ogo, utsi and ultracmo s are registered tr ademarks and harp, multiswitch and dune are trademar ks of peregrine semiconductor corp. ordering information table 7 lists the available ordering codes for the pe42426 as well as available shipping methods. table 7 ? order codes for pe42426 order codes description packaging shipping method pe42426a-z pe42426 spdt rf switch 12-lead 3 3 0.75 mm qfn 3000 units/t&r EK42426-01 pe42426 evaluation kit evaluation kit 1/box

▲Up To Search▲

Price & Availability of EK42426-01

	To Download EK42426-01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .